Battleware MOS Plate for the Glock MOS platform. Fits Trijicon RMR/SRO and Holosun 407/507/508t footprints.This plate was created to address the short comings of factory MOS plates with fitment and reliability issues. Made of 1018 steel and coated using Cerakote for increased corrosion resistance. New hardware is provided to replace both factory Glock MOS plate screws and 6-32x3/8 screws for your RMR/SRO. WHEN MOUNTING A 407/507/508t USE THE 6/32 SCREWS PROVIDED WITH THE OPTIC.

M3-0.5X6MM PLATE TO SLIDE SCREWS - T10 TORX - 12 INCH LBS

6-32X3/8 OPTIC TO PLATE SCREWS FOR RMR/SRO - T15 TORX - 12 INCH LBS

USE HOLOSUN'S RECOMMENDED TORQUE SPEC WITH THEIR SCREWS.

DISCLAIMER: This plate was designed around the small frame family of slides (17/22/32 etc.) However with the wider design of our plate it will accommodate use with the large frame family of slide widths as well (21/20 etc.) When using this plate on a large frame gun there will be overhang of the slide. This plate will not work with the micro Glock slides (43/43x/48).

100% DESIGNED AND MANUFACTURED IN THE USA.